产品名称：turnbuckles 花篮螺丝
品牌：美国crosby
型号：hg-223--hg228
技术指导：
终端部件经过淬火、回火或标准化，而部件体通过标准化进行热处理。
锻造的卡爪端装配有 6 毫米至 16 毫米的螺栓和螺母以及 19 毫米至 70 毫米的开口销。
在终端部件上修改了 unj 螺纹以提高疲劳性能。部件体上有 unc 螺纹。
满足或超过所有 asme b30.26 要求，包括标识、延展性、设计系数。end fittings are quenched and tempered or normalized, bodies heat treated by normalizing.
• hot dip galvanized steel.
• turnbuckles recommended for straight or in-line pull only.
• forged jaw ends are fitted with bolts and nuts for 6 mm through 16 mm, and pins and cotters
on 19 mm through 70 mm sizes.
• modified unj thread on end fittings for improved fatigue properties.
• body has unc threads.
• meets or exceeds all requirements of asme b30.26 including identification, ductility, design
factor, proof load and temperature requirements. importantly, these turnbuckles meet other
critical performance requirements including fatigue life, impact properties and material
traceability, not addressed by asme b30.26.
• lock nuts available for all sizes (see page 194).
• comprehensive end fitting data provided on page 192.
• fatigue rated.
、验证负荷和温度要求。
重要的是，这些夹紧螺母满足其他重要要求，其中包括疲劳寿命、冲击性能和材料可追溯性要
求，而不仅仅是由 asme b30.26 提出的要求。
额定疲劳。
搜索关键词：crosby、卸扣、花兰、卡头、吊环、缆绳、钢丝绳、起重链
深圳市强镜起重设备有限公司
13798270600
中国 深圳